Book a session
Home / Subjects / Physics / GCSE / IGCSE Physics / Energy Resources and Generating Electricity
Energy

Energy Resources and Generating Electricity

Renewable and non-renewable resources, how power stations work, and comparing reliability, cost and environmental impact.

The big idea

Most electricity is generated by spinning a turbine that turns a generator. What differs is where the energy comes from. Non-renewable resources (coal, oil, gas, nuclear fuel) will run out. Renewable resources (wind, solar, hydroelectric, tidal, wave, geothermal, biofuel) are replaced as fast as they are used.

fuel or reactorboiler: steamturbinegeneratortransformernational gridwasted energy heats the surroundings at every stagechemical or nuclear → thermal → kinetic → electrical
How a thermal power station generates electricity. Renewable sources such as wind and water turn the turbine directly.

Key ideas

  • Fossil-fuel and nuclear stations heat water to make steam, which drives a turbine connected to a generator.
  • Burning fossil fuels releases carbon dioxide (climate change) and sulfur dioxide (acid rain). Nuclear power releases neither, but leaves radioactive waste.
  • Wind and solar are clean but unreliable: their output depends on the weather.
  • Hydroelectric and tidal schemes are reliable but need suitable sites and can damage habitats.
  • Fossil-fuel and hydroelectric stations can respond quickly to changes in demand; nuclear stations cannot.

Equations

efficiency = useful power out / total power in
E = Ptenergy generated (kWh if P is in kW and t in hours)

Worked example

A 2.0 MW wind turbine produces, on average, 30% of its maximum output. How much energy does it generate in a day, and how many homes using 10 kWh a day could it supply?

  1. Average power = 0.30 × 2000 kW = 600 kW.
  2. Energy in a day = 600 × 24 = 14 400 kWh.
  3. Homes supplied = 14 400/10 = 1440.
Answer: 14 400 kWh; about 1440 homes

Common mistakes

  • Calling nuclear power renewable. Uranium is a finite resource.
  • Saying renewable resources have no environmental impact. Dams flood valleys and turbines affect landscapes and wildlife.

Try it yourself

A solar panel of area 1.6 m² receives 1000 W/m² of sunlight and is 20% efficient. What is its electrical power output?

Show the answer

Power in = 1600 W; output = 0.20 × 1600 = 320 W.

GCSE exam level

Going deeper: GCSE exam level

Exam technique, a longer multi-step worked example and exam-style practice with hidden solutions.

Comparing resources in the exam

Compare using the same headings each time: is it renewable, is it reliable, what does it cost to build and run, and what does it do to the environment? A sensible answer usually recommends a mix: reliable base-load stations, plus renewables, plus something that can start quickly when demand peaks.

More worked examples

Example 1. A coal power station burns fuel releasing 1500 MW and generates 525 MW of electricity. Find its efficiency and the power wasted, and say where it goes.

  1. Efficiency = 525/1500 = 35%.
  2. Wasted = 1500 − 525 = 975 MW.
  3. Most of it heats the cooling water and the surrounding air.
Answer: 35%; 975 MW wasted as heat

Exam-style practice

1. Give one advantage and one disadvantage of tidal power.

Show the solution

Advantage: predictable and renewable. Disadvantage: few suitable sites, and barrages damage estuary habitats.

2. Why can't a country rely on solar power alone?

Show the solution

It generates nothing at night and little in cloudy weather, so supply would not match demand without storage.

Where this fits in each exam board

Cambridge IGCSE (0625)Topic 1: Motion, forces and energy
Edexcel International GCSE (4PH1)Section 4: Energy resources and energy transfers
AQA GCSE (8463)4.1 Energy
Worksheet for this lesson

4 questions to print or save, with full step-by-step answers at the end.

See it in action

Open the Transformers & Power Transmission simulation and test every idea on this page yourself.

Open the simulation →